Filling machine use, maintenance and installation

1. Because this filling machine is an automatic machine, the dimensions of easy-to-pull bottles, bottle pads and bottle caps are required to be unified.

2. Before driving, you must use the crank handle to turn the machine to see if there is any abnormality in its rotation, and it can be confirmed that it is normal before driving.

3. When adjusting the machine, the tools should be used properly, and it is strictly forbidden to use too large tools or excessive force to remove the parts to avoid damaging the parts or affecting the performance of the machine.

4. Whenever the machine is adjusted, be sure to tighten the loosened screws, and use the crank handle to turn the machine to see if its action meets the requirements before driving.

5. The machine must be kept clean. It is strictly forbidden to have oil stains, liquid medicine or glass debris on the machine, so as to avoid damage to the machine. Therefore, it is necessary to:

(1) During the production process of the machine, the liquid medicine or glass debris should be removed in time.

⑵Before the shift, all parts of the machine surface should be cleaned once, and clean lubricating oil should be added to each activity department.

(3) It should be scrubbed once a week, especially the places that are not easy to be cleaned in ordinary use or blow it with compressed air.